The Common Problem With Rail Turnout

Edit:Zongxiang Heavy Industry--Carina Date:2018-07-08 15:16:29

Diseases left over when the rail turnout assembly is laid. This kind of disease including railway electrification transformation, attunements column after embedding the linkage rail rurnout in the two point offset, crossing the line direction of harmful, split rail and rail guard rail which appear on the hard to bend.

Typical diseases in the operation of rail turnout. The diseases include corrosion and wear of spare parts, breaking of the joint pad at the heel of the sharp rail, dissoldering of the slide bed platform, crushing and breaking of the rubber pad, etc.

Problems in maintenance and maintenance. Maintenance personnel to speed up the rail turnout the daily maintenance of curing insufficient understanding, accelerated the subjective think fork don't need to conduct a comprehensive way tamping, to speed up left over from the rail turnout assembly laying methods did not take corresponding treating methods and measures, leading to disease gradually.

Problems caused by dredging and mud rising in the bed. The mud pumping fork bed is mainly due to the change speed rail turnout, blocking time short, ill-prepared or affected by the longitudinal profiles of existing lines in construction the pillow under the insufficient thickness of ballast, which is usually caused by poor drainage.

If you are interested in our products, please leave a message or contact us.

Tel:+86-182 3676 6038(WeChat)

E-mail:zxsteel@zxsteelgroup.com