The rail clip is an accessory used to compress and fix the rail and the I-beam or concrete beam or the ground. Generally fastened with hexagonal bolts or embedded bolts. The rail clip is also called the driving pressure plate, the crane pressure plate, the track pressure plate, and the crane pressure plate.

#114 rail clip is a kind of rail pressure plate. Recently, a customer Jhon from Vietnam purchased 3000 pieces of #114 rail clip from our company. At present, all the goods have been packed and will be sent to the destination soon.

Jhon is a buyer of a factory in Vietnam. Recently, the factory needs to replace the track line. All the rails have been purchased, but no suitable supplier has been found to provide accessories.

Because the price of the rail clamp is relatively high, the customer tends to use the clip to fasten the rail. After some searching, the customer found the foreign trade website of our company Zongxiang.

After a simple communication with Jhon, our customer service personnel learned about the products and quantities required by the customer, and then our business personnel quickly quoted the price to the customer, and gave the customer a detailed explanation of the product parameters, quality, installation method, etc. The customer was very satisfied with our service and finally decided to purchase these 3000pcs #114 rail clip from us.

Requirements for installing rail clip:

1. After the rail joint is laid and the composite rubber backing plate is laid, the track is adjusted and positioned, and the bolts, pressure plate and other parts are in place, so that the pressure plate is tightly pressed against the lower flange of the rail, and then the backing plate, spring washer, and nuts are tightened to the pressure plate. On, the compression amount of the rubber tongue is about 2-3mm;

2. The allowable deviation of the track installation requires that the position deviation of the center line of the track is ?±5mm; the elevation difference of the top surface of the track is ?±5mm; the distance deviation between the center lines of the two tracks is ?±5mm; the relative elevation of the top surfaces of the two tracks at the same horizontal position Poor; column ? 10mm other places ? 15mm;

3. The elastic composite rubber backing plate is matched with the track pressing plate, if the track pressing plate is QU80 type, that is, the 7a-3 composite backing plate is selected;

4. Select the bolts according to the type of the pressure plate.

Zongxiang Company is a professional rail and rail accessories sales company with more than 20 years of sales experience. The main rails include China standard rails, Japanese standard rails, American standard rails, and German standard rails.Rail clamp, rail clip, rail fishplate, rail spike, etc. If you are interested in our products, please contact us in time.